Brass Instrument Repair Tools

  • 50 Products
  • Sort by:
  • Products Per Page:
  • These precision made, polished and chrome plated, expanders have the proper internal expansion angle to give you a feel when you are fitting the job and also help prevent scratching the internal surfaces.These tough long lasting steel tools can be held in your hand or in a bench vise.These expanders all work on the same principle. They make an even, tight fit from loose and worn sax neck tenons and metal flute head and foot tenons, by rounding ou...
    $99.99 | SAVE 28%
    SHIPS DIRECTLY FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Ferree's Mouthpiece Puller
    Item # RT008
    | Mfg # G88
    | UPC #
    Simple to operate . . . just clamp, lock, and screw! No marring of instrument - no parts to lose or replace - no adjustments necessary - no bench needed - no vise needed - no die-cast parts - machined from sturdy steel - chrome-plated - single screw operation.
    $108.99 | SAVE 31%
    SHIPS DIRECTLY FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Ferree's N54S Knuckle Dent Rods, Set of 5
    Item # RT044
    | Mfg # N54S
    | UPC #
    Many dents on brass instruments can be removed easily using these knuckle tools. The tools are designed so that they can get into many “hard to reach” areas, then dents can be pushed out without unnecessary hammering or over working the brass.This cuts down on the possibility of cracking or stretching the metal. With these tools you reverse the action of the impact which caused the dent. In other words, you push the metal out instead ...
    $82.99 | SAVE 26%
    SHIPS DIRECTLY FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • These dent balls are designed spherically, so there is no possibility of making lateral ridges in the tubing. Made of chrome steel with a satin sandblast finish. This finish has minute pores which hold Vaseline (or any other lubricant) longer for easy use in tubing.Set of 3 balls  (10-24 thread) 5/16” (7.9mm), 3/8” (9.5mm), 7/16” (11.1mm)Use on the N54 Knuckle Tools, the N68 Right Angle Mandrel and the N91B Tapered Mandrel.
    $19.99 | SAVE 31%
    SHIPS DIRECTLY FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Ferree's Piccolo Joint
    Item # RT057P
    | Mfg # H63
    | UPC #
    Ferree's Piccolo Joint
    $99.99 | SAVE 20%
    SHIPS DIRECTLY FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Ferree's Standard Repair Kit
    Item # RT080
    | Mfg # Q30
    | UPC #
    For band directors who don't want to get into emergency repairs deeply enough to buy the Q29, this Q30 will answer many problems. The Q30 Standard Kit includes: Cork cement, round nose pliers, spring hook, swivel top screwdriver, feelers, cork knife, valve oil, slide oil, bore oil, cork grease, clarinet pads, sax pads, flute pads, water key springs, French horn cord, flat spring screws, alcohol lamp, key bending pliers, brasso, pad leveling tool,...
    $499.99 | SAVE 28%
    SHIPS DIRECTLY FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Ferree's Tenor Sax Gooseneck
    Item # RT057TS
    | Mfg # H61
    | UPC #
    Ferree's Tenor Sax Gooseneck
    $99.99 | SAVE 28%
    SHIPS DIRECTLY FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Ferree's Trombone Bumper Remover - Bass
    Item # RT051
    | Mfg # G41B
    | UPC #
    Ferree's Trombone Bumper Remover - Bass
    $33.99 | SAVE 12%
    SHIPS DIRECTLY FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Ferree's Trombone Bumper Remover - Tenor
    Item # RT050
    | Mfg # G41A
    | UPC #
    Ferree's Trombone Bumper Remover - Tenor
    $33.99 | SAVE 12%
    SHIPS DIRECTLY FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Set of replacement collars (20 halves)
    Item # RT165
    | Mfg # 102
    | UPC # 082562071063
    Set of replacement collars (20 halves)
    $15.99 | SAVE 36%
    0 IN STOCK, EXPECTING MORE SOON
  • Valentino Director's Brass Fix Kit - 700017
    Item # RP065
    | Mfg # 700017
    | UPC # 842473080376
    New and more versatile tool designs, more comprehensive assortments, greater service capability, and peel and stick convenience make the Directors Brass Fix Kit better than ever! The Directors Brass Fix Kit features a newly designed Stuck Slide Service Kit that adjusts to fit slides from trumpet to tuba. A Rotor Valve Restringing Kit has also been added to this product. These new tools, coupled with the mouthpiece puller, mouthpiece shank dent ...
    0 IN STOCK, EXPECTING MORE SOON
  • Valentino Director's Brass Supply Assortment - 700020
    Item # RP067
    | Mfg # 700020
    | UPC # 842473080352
    The new Directors Brass Supply Assortment provides a convenient array of brasswind repair items needed for proper instrument repair. This is the perfect assortment for most band rooms, and especially for the travelling Ed Rep. The clear plastic case with sealing lid contains the complete brass washer assortment, waterkey assortment, and spring assortment standard with the Directors Brasswind Fix Kit.
    0 IN STOCK, EXPECTING MORE SOON
You have selected
  • Filter: Brass Instrument Repair Tools

Narrow Your Results
Financing with Blispay