Palmer Germany / Musical Instruments

  • 45 Products
  • Sort by:
  • Products Per Page:
  • Palmer Germany - DACCAPO Re-Amplification Box
    Item # EFFPDACCAPO
    | Mfg # PDACCAPO
    | UPC #
    A Reamping-Box is mainly used in studios. It allows you to play back a recorded guitar signal and send it to a guitar amp, where it can again be taken and recorded by the microphone. This way, the recording engineer can experiment with the sound of an instrument and different amplifiers at his leisure. The DACCAPO box ensures optimal impedance matching and eliminates ground loop hum through the use of a transformer. The signal level to the amplif...
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Palmer Germany - P3EASY 3-Easy Amp Selector Foot-Switch
    Item # EFFP3EASY
    | Mfg # P3EASY
    | UPC #
    Palmer 3EASY - the little brother of Palmer TRIAGE. The 3EASY switches the input signal (e.g. of a guitar) between 3 outputs. The Amp Selector has all the outstanding features of the T-series. For increased dynamic response and headroom, it steps up the 9V power supply to approx. 30V. Switching is silent and instantaneous. This is achieved by processor controlled long-life microswitches while the actual footswitches serve as mechanical triggers o...
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Palmer Germany - PCABM Cab M Passive Cabinet Merger
    Item # EFFPCABM
    | Mfg # PCABM
    | UPC #
    The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier output? It's quite simple with the PCABM! In addition, you can choose parallel or series wiring. For instance, two 8 ohm cabinets can be connected for a total load of 4 ohms (parallel) or 16 ohms (in series). The device is entirely passive and does not affect tone in any way. Fea...
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • The Palmer Speaker Simulator PDi 03 - available in 2, 4, 8 and 16 Ohm The PDI03 Palmer speaker simulator combines load impedance, a signal splitter and DI box especially designed for guitars. All functions are optimised for live and recording applications.Instead of being connected to a loudspeaker, the PDI03 is connected directly to the amplifier output. The signal is no longer picked up by a microphone, but after passing through a special filte...
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • The Palmer Speaker Simulator PDi 03 - available in 2, 4, 8 and 16 Ohm The PDI03 Palmer speaker simulator combines load impedance, a signal splitter and DI box especially designed for guitars. All functions are optimised for live and recording applications. Instead of being connected to a loudspeaker, the PDI03 is connected directly to the amplifier output. The signal is no longer picked up by a microphone, but after passing through a special filt...
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • The Palmer Speaker Simulator PDi 03 - available in 2, 4, 8 and 16 Ohm The PDI03 Palmer speaker simulator combines load impedance, a signal splitter and DI box especially designed for guitars. All functions are optimised for live and recording applications. Instead of being connected to a loudspeaker, the PDI03 is connected directly to the amplifier output. The signal is no longer picked up by a microphone, but after passing through a special filt...
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • The Palmer Speaker Simulator PDi 03 - available in 2, 4, 8 and 16 Ohm The PDI03 Palmer speaker simulator combines load impedance, a signal splitter and DI box especially designed for guitars. All functions are optimised for live and recording applications. Instead of being connected to a loudspeaker, the PDI03 is connected directly to the amplifier output. The signal is no longer picked up by a microphone, but after passing through a special filt...
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Palmer Germany - PDI06L04 Power Attenuator - 4 Ohms
    Item # EFFPDI06L04
    | Mfg # PDI06L04
    | UPC #
    Palmer Power Attenuator - Control the volume of your guitar amp The PDI06 is a power attenuator for live applications. The device is connected between the amplifier output and the speaker cabinet. It makes it possible to use the popular power stage distortion of tube amplifiers while reducing the associated high volume level. This permits practical volume reduction in six increments from 100% to 18% for stage and practice room situations. An addi...
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Palmer Germany - PDI06L08 Power Attenuator - 8 Ohms
    Item # EFFPDI06L08
    | Mfg # PDI06L08
    | UPC #
    Palmer Power Attenuator - Control the volume of your guitar amp The PDI08 is a power attenuator for live applications. The device is connected between the amplifier output and the speaker cabinet. It makes it possible to use the popular power stage distortion of tube amplifiers while reducing the associated high volume level. This permits practical volume reduction in six increments from 100% to 18% for stage and practice room situations. An addi...
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Palmer Germany - PDI06L16 Power Attenuator - 16 Ohms
    Item # EFFPDI06L16
    | Mfg # PDI06L16
    | UPC #
    Palmer Power Attenuator - Control the volume of your guitar amp The PDI16 is a power attenuator for live applications. The device is connected between the amplifier output and the speaker cabinet. It makes it possible to use the popular power stage distortion of tube amplifiers while reducing the associated high volume level. This permits practical volume reduction in six increments from 100% to 18% for stage and practice room situations. An addi...
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Palmer Germany - PDI09 Passive DI Box for Guitars
    Item # EFFPDI09
    | Mfg # PDI09
    | UPC #
    The PDI09 can be connected between an effect device or amplifier and the mixing console. The PDI09 is not suitable for direct connection to a guitar. Integrated filter circuits simulate the authentic "speaker" sound. Tone can be varied between "Mellow", "Normal", or "Bright". Features: Product type: speaker simulator Type: passive Channels: 1 Input type: unbalanced Inputs: 1 Input connectors: 6.3 mm Jack Output type: balance...
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Palmer Germany - PDI09MP Mounting Plate for C Housing PDI 09
    Item # SR649PDI09
    | Mfg # PDI09MP
    | UPC #
    The PDI09MP mounting plate permits secure, sturdy mounting of your Palmer DI box/line isolation box - whether inside your guitar combo or under a table in fixed installations. The plate attaches quickly using the cover screws of the unit. Two 15mm wood screws included. Features: Product type: Mounting plate Material: sheet steel Surface: powder coated Width: 61 mm Material thickness: 1,5 mm Mounting hole diameter: 3,5 mm Fea...
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
You have selected
  • Filter: PALMER GERMANY

CLEAR ALL

Narrow Your Results
Call Us For The Best Pricing