ART CleanBOX II Passive Hum Eliminator

Item # ET284CLEANBX2
| Mfg # CLEANBOX2
| UPC # 840402015666
Our Price: $55.00
Retail: $65.00 | You Save: 15%
Free shipping
SHIPS DIRECTLY FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
Qty:



One of the most frustrating problems in a complex audio system is the dreaded ground or 60-cycle hum. Typically, these loops are created when one or more units are connected together, each with its own ground plane. This creates what are commonly called "ground loops" which can act like antennae, picking up a 60 Hz (or higher harmonics) hum transmitted by electrical wiring, lighting dimmers, transformers and other components and adding that 'noise' to the audio signal path. The safest way to eliminate unwanted noise created by ground loops is with the CleanBOX II.

The CleanBOX II easily removes ground loops without any signal degradation by isolating grounds between components, for example, breaking the 'loop' between a synthesizer and a mixer, a sub mixer and the front-of-house console or between rack effect units and a guitar amps' Fx send and return.

Features:
  • The power ground of a synthesizer, connected to the signal ground of the synth, into a mixer's ground, then into a mixer's power ground.
  • The signal ground of a send effect (reverb, delay) into a mixer, and the connecting power grounds of the mixer and the unit.
  • The power ground of a guitar amplifier, connected to a signal processor which has a second guitar amplifier on the other channel, and then the second guitar amp's power ground.
  • The CleanBOX II easily removes ground loops without any signal degradation.
Specifications:
  • Frequency Response: 10Hz ? 50kHz, +/- .5dB @ +4dBu
  • THD: .01% Typical @ 1kHz, +18dBu, <.05% @ 100Hz, +24dBu
  • Insertion Loss: .4dB @ 100kOhm Load, 5.5dB @ 600Ohm Load
  • Connections: 1/4-inch TRS balanced/unbalanced jacks
  • Dimensions: 1.7 H x 4.7 W x 3.0 D (in) / 43 H x 119 W x 76 D (mm)
  • Weight: .75 lbs / .34 kg
Overview

No one has rated this yet. Why don't you be the first?

WRITE A REVIEW

Product Warranty Information

 
Art Audio
 
Tel: (401) 826-8286; Email: artaudio1@cox.net; Art Audio Website; 3 Years Parts and Labor with the exception of ART Microphones which are 2 Years Parts and Labor

  Product warrenty information

 
All instruments in our catalogs and on our shopping site carry the manufacturers' warranties against defects in parts and workmanship. Should a defect occur within the manufacturer's warranty period, contact us immediately.

We will be glad to help facilitate the repair or replacement as specified by the manufacturer. The manufacturer will determine whether the defect is covered under their warranty; we do not make that determination.

Please note: U.S.-based manufacturers WILL NOT honor warranties for items sold and shipped outside the U.S. Also, if a school, school district, or board of education purchases an instrument and resells it to an individual, the manufacturer considers the warranty to be void. Warranties are extended only to the original purchaser!

All warranties, stated or implied are held with the product manufacturer and they vary from item to item. Consult the documentation that came with your product for details in addition to the information below.
Subscribe to our newsletter
Retail Store
ART is a company comprised of musicians, engineers and recording enthusiasts. Since its inception in 1984, we have been striving to redefine the performance versus price barrier with a series of innovative new audio products designed with the needs of the musician in mind.
Financing with Blispay