Utility and Gear Cases, Bags and Covers

  • 81 Products
  • Sort by:
  • Products Per Page:
  • Gator G-PRO-2U-19 Rack Case
    Item # EC9412U
    | Mfg # GPRO2U19
    | UPC # 716408522425
    G-PRO-2U-19 Features: 2 Space rack Indestructible roto molded polyethylene design 19" Rackable depth Recessed Penn Elcom twist latches Front and rear lids Molded-in, ergonomic side carry handles Heat treated 10/32 screws with protective washers included Stackable outer case design
    $114.99 | SAVE 30%
    ONLY 1 IN STOCK, USUALLY SHIPS IN 3 DAYS
  • Gator GX-22 Rolling Snake Utility Case
    Item # CS67622
    | Mfg # GX22
    | UPC # 716408502694
    Now hauling your snakes to the gig just got easier with the new Cable Caddy line! The GX-22 Snake Caddy is the big daddy to the GX-20 and is built to easily carry a 100' hard wired snake along with all the other required cabling. The lift out tray is large enough for small mixers, cabling and other devices required to setup a professional sound system. The front zipper pocket holds smaller items. Both the Snake and Cable Caddy are made with the G...
    $269.99 | SAVE 37%
    ONLY 1 IN STOCK, USUALLY SHIPS IN 3 DAYS
  • Gator Nylon cover for LCD screens. 51.5 x 33 x 6, G-LCDCOVER-52
    Item # CT184GLCDCVR5
    | Mfg # GLCDCOVER52
    | UPC # 716408515236
    These Plasma Screen Covers are the perfect way to protect plasmas and LCDs. They feature a heavy duty, water barrier nylon exterior, rigid ployethylene sheet sewn into the liner for protection, and 10mm protective padding. Heavy-duty water barrier nylon exterior Rigid polyethylene sheet sewn into liner for protection 10mm protective padding with Tricot interior Rear access for using cover when screen is on mount
    $124.99 | SAVE 37%
    ONLY 1 IN STOCK
  • Hohner C-12 Harmonica Carrying Case
    Item # HA002C12
    | Mfg # C12
    | UPC #
    The C-12 Harmonica Carrying Case is made of high impact plastic with solid aluminum, for maximum yet lightweight protection. Holds up to twelve, 10-hole diatonics and one chromatic. Solid protection in a lightweight case Holds 10 diatonics and 1 chromatic 12 3/8 x 10 1/2 x 2 3/4 Inches 2.5 lbs Holds up to twelve,10 hole diatonics and one chromatic. Dimensions of the case is 12 3/8 x 10 1/2 x 2 3/4 deep. Weight is 2 lbs. 5 oz. ...
    $49.00 | SAVE 25%
    ONLY 1 IN STOCK, USUALLY SHIPS IN 3 DAYS
  • Hohner HB-6 Harmonica Holding Belt - Black
    Item # HA002HB6
    | Mfg # HB6
    | UPC # 048667004962
    Soft cushioned back with easy side release buckle Provides quick access Fits waist sizes 29-Inch to 48-Inch Holds 6 harmonicas Product dimensions: 6 x 10 x 1 inches
    $27.00 | SAVE 27%
    ONLY 1 IN STOCK, USUALLY SHIPS IN 3 DAYS
  • Mollard Black Nylon Baton Tote
    Item # CS983MBT16
    | Mfg # MBT16
    | UPC #
    This item has become an extremely popular accessory to Mollard batons. It is a reinforced, tri-fold "wallet" for batons up to 16 inches (405mm) in length. It features loops for securing up to four batons, a stiff spine, black nylon duck covering and velcro enclosures. The Mollard Conducting Baton logo graces the front of this item.
    $31.48 | SAVE 19%
    ONLY 1 IN STOCK
  • Odyssey - KCC-4 Pro Cartridge Case - Black
    Item # EC678
    | Mfg # KCC4
    | UPC #
    Odyssey's KCC-4 Pro Cartridge case keeps mounted or Concorde style cartridges safe and secure for DJs on the go. Whether you carry Shure, Ortofon, Stanton, etc. you'll have no worries with the KCC-4's hard exterior and suspended bayonet holders that keep the carts in place and, cushioned by soft density cartridge lid egg foam. Also includes a compartment for your spare needles. Features: all black coated hardware exterior holds Concorde &am...
    ONLY 1 IN STOCK, USUALLY SHIPS IN 3 DAYS
  • Roland OP-R05C Cover/Windscreen Set for R0-5 - B-Stock
    Item # EC902R05CB
    | Mfg # OPR05C
    | UPC #
    This package includes a special cover for the R-05 recorder, plus a windscreen that can be used with the cover on. This cover protects the R-05 against dirt, scratches, and minor impacts. During recordings, it reduces handling noise and surface vibration. The windscreen is made of special material that minimizes the undesirable effects of wind noise.
    $69.99 | SAVE 11%
    ONLY 1 IN STOCK, USUALLY SHIPS IN 3 DAYS
  • SKB - 20" Deep 6U Rolling Roto Shock Rack Case
    Item # EC961
    | Mfg # 3SKBR06U20W
    | UPC # 789270090644
    The Rolling Shockmount Case series incorporates our black powder coated twist latches with locking loops and low profile injection molded pull handle. The molded design provides extra stiffness in the lids and sides while also allowing the racks to stack securely together.Features: Black powder coated twist latches with locking loops Threaded steel rails Rear rails Built-in wheels Shock and water resistant Low profile pull handle ...
    $719.99 | SAVE 45%
    ONLY 1 IN STOCK, USUALLY SHIPS IN 3 DAYS
  • Boss BA-BR80S Silicone Case/Pouch Set for BR-80 Digital Recorder
    Item # ET224BR80
    | Mfg # BABR80S
    | UPC # 761294501252
    This custom-made silicone case and carrying pouch is specially designed for the MICRO BR BR-80. The case protects the unit from scratches and dust and provides a secure grip. It also reduces unwanted noise due to vibrations during operation while using the onboard mics. The carrying pouch, made of the cushioned material, protects the BR-80 from mild impacts and potential damage during transportation.
    $36.95 | SAVE 24%
    0 IN STOCK, EXPECTING MORE SOON
  • DEF - C16-RD16U - Bass Clarinet Case, wood, 1 piece
    Item # CS010C16RD16U
    | Mfg # C16RD16U
    | UPC #
    Our one-piece bass clarinet case has been re-designed to fit standard bass clarinets and models with low Eb on body or low C on bell. This new model C16-RD16U replaces C16-RD16 and C16-RD16L. Constructed of heavy duty MDF plywood and covered with black vinyl, the exterior of the case includes binding that is stitched to the edges. All exterior corners have metal corners for increased durability. Interior of case is black plush lined. Adjustable b...
    $143.97 | SAVE 26%
    SHIPS DIRECTLY FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • FreeHand Deluxe Carrying Bag for MusicPad Pro
    Item # EC040
    | Mfg # 639003
    | UPC #
    This deluxe carrying bag features a handle and carrying strap, a large padded interior pocket for the MusicPad, three exterior zippered pockets, and one velcro fastened pocket. Made of durable 1000 denier nylon, this bag is water and abrasion resistant, with black leather corners and rugged plastic hardware for added durability. It measures 11" high, 15.5" wide, and 6.5" deep. Weight of this bag is approximately 1 pound.
    0 IN STOCK, EXPECTING MORE SOON