Power and Batteries

Seven-outlet power strip features 15 amp circuit breakers, 12' power cord with three-prong grounded plug, three-prong outlets, and a lighted on/off switch. Durable construction includes metal housing. UL and cUL approved.Features:  7 Outlets Metal Power Strip 3-prong Receptacle: 7 - 12ft

The power condition in the U.S. is unstable. The AC power that runs your home theater is constantly in a state of flux. Sometimes there's too much voltage, sometimes not enough. Power can become so unstable that you can actually see it happening, like when the lights in your house suddenly begin flickering. during the worst case scenario, when your equipment turns back on, a power spike can be 200-300 volts. Your expensive electronic home theate...

Lenmar PTD9095 Nickel Metal Hydride Hardware Tool Battery - Nickel-Metal Hydride (NiMH) - 18V DC

The Monster Cable GreenPower MP HDP 900G 8-Outlets Surge Suppressor provides the advanced protection you need to keep all your valuable equipment protected against even the most powerful surges. It's Exclusive Dual Mode Plus automatically disconnects to isolate your equipment from harmful surges and spikes. It also sounds an alarm to let you know that the PowerCenter has protected your electronics from dangerous power conditions. It features pate...

Monster Cable GreenPower MP HDP 850G 8-Outlets Surge Suppressor - Receptacles: 8 x AC Power - 2160JThe Monster Cable GreenPower MP HDP 850G 8-Outlets Surge Suppressor provides the advanced protection you need to keep all your valuable equipment protected against even the most powerful surges. The Exclusive Dual Mode Plus automatically disconnects to isolate your equipment from harmful surges and spikes. It also sounds an alarm to let you know tha...

A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8x2 in to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. The M-8x2 is designed for applications where lights are not required. Features: Noise Filtration: AC noise filtering to reduce radio frequency and electromagnetic interference (R...

Lenmar PTB026 Nickel Metal Hydride Hardware Tool Battery - Nickel-Metal Hydride (NiMH) - 18V DC

Four Jack, Phoenix Block Connector Style Splitter Box

Sturdy, rack-mountable power distributor. Featuring 10 rear panel outlets with circuit breaker, it offers a convenient way to power a rack full of equipment up to a 15 amp load.

APP22 As more and more systems are using multiple condenser microphones, multiple phantom powered D.I.s and accessories, the need for additional phantom power sources becomes evident. In situations where stereo direct recording is happening with two condenser source microphones, the obvious solution is a single 'dual-channel' power supply. The APP22 is designed to specifically fill that need. Apex APP22 Phantom Power Supply Features: Phantom ...

Audio-Technica AT8801 The Audio-Technica AT8801 Phantom Power is a line-powered device that allows the use of remote-powered microphones with systems that don't provide phantom power. A highly regulated power supply provides constant voltage even with a heavily loaded input. The Audio-Technica AT8801 is internally protected to prevent overheating and damage due to shorts. The heavily enameled case shields the interior from electrostatic interfer...