Sound and Keys Accessories

  • 8 Products
  • Sort by:
  • Products Per Page:
  • Palmer Germany - PDI09MP Mounting Plate for C Housing PDI 09
    Item # SR649PDI09
    | Mfg # PDI09MP
    | UPC #
    The PDI09MP mounting plate permits secure, sturdy mounting of your Palmer DI box/line isolation box - whether inside your guitar combo or under a table in fixed installations. The plate attaches quickly using the cover screws of the unit. Two 15mm wood screws included. Features: Product type: Mounting plate Material: sheet steel Surface: powder coated Width: 61 mm Material thickness: 1,5 mm Mounting hole diameter: 3,5 mm Fea...
    $13.95 | SAVE 30%
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Palmer Germany - PEABI Balanced Line Input Switcher
    Item # EFFPEABI
    | Mfg # PEABI
    | UPC #
    The Palmer PEABI is more than a simple switcher for two sources, it also provides level adjustment of microphone or line signals. Whether microphone or line signal, the PEABI toggles silently between the two inputs permitting fast and simple signal comparison and the connection of two sources to one input. Three slide switches select 15 dB of attenuation for input A and 6, 15 or 21 dB for input B. A ground lift switch eliminates earth loop hum. T...
    $95.95 | SAVE 36%
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Palmer Germany - PEABO Balanced Line Output Switch
    Item # EFFPEABO
    | Mfg # PEABO
    | UPC #
    Palmer PEABO is a Balanced Line Output Switch with one input and two outputs. Thus, it is the perfect choice for routing a signal to either one of two possible inputs. Switch your vocal mic between the FOH and monitor mixing desk to communicate with the monitor mixer or the band on stage. Two different sound configurations: to switch between different effects or sounds on your microphone, e.g. a "telephone effect" or more levels of reverb...
    $95.95 | SAVE 36%
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Palmer Germany - PEDMS Dynamic Mic Switcher
    Item # EFFPEDMS
    | Mfg # PEDMS
    | UPC #
    The Palmer DMS (Dynamic Mic Switcher) routes a microphone signal to two footswitch-selectable outputs. The Palmer DMS is a passive unit for dynamic microphones only. The switch is instantaneous and is operated via a footswitch. The DMS provides a wide range of applications : Switch your vocal mic between the FOH and monitor mixing desks to communicate with the monitor mixer or the band on stage. Two different sound configurations: to swit...
    $79.95 | SAVE 50%
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Palmer Germany - PGA03 Y-Box Splitter for Guitars
    Item # EFFPGA03
    | Mfg # PGA03
    | UPC #
    "When I run my guitar into two amps simultaneously, I always get a loud hum". This is a rather common problem, often discussed in the technology section of relevant industry magazines. The Palmer Y box is the solution. Converting the hi-Z guitar signal, the FET input circuitry also drives a transformer which routes the ungrounded signal to the output to eliminate ground loop hum. 9V battery operation is recommended. The PGA03 Y-box can also be us...
    $169.95 | SAVE 50%
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • Palmer Germany - PW9V Standard 9 Volt Power Pack
    Item # ET346PW9V
    | Mfg # PW9V
    | UPC #
    Power supply for all Palmer devices with a 9 V input connector and a maximum power consumption of 300 mA. Features: Product type: power supply Type: Switching Power Supply Mains connector: IEC connector Input voltage: 100 - 240 V Outputs: 1 Output connectors: 2.1 x 5.5 mm Output voltage: 9 V Max. output current: 300 mA Polarity: center negative Cord length: 150 cm Width: 70 mm Depth: 30 mm Height: 70 mm W...
    $19.95 | SAVE 39%
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • With the PWC6 you can power up to 6 units from one single power outlet. Considering that most common effects have a power consumption of approx. 20mA, a 300mA power supply such as the Palmer PW9V can thus often suffice to power 6 units.Features: Product type: power distributor (Daisy Chain) Inputs: 1 Input connectors: Coaxial power connector 5,5 x 2,5mm Outputs: 6 Output connectors: Coaxial power connector 5,5 x 2,5mm (9,5mm shaft ...
    $9.95 | SAVE 50%
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
  • The PWT12 is universal pedal board power supply with 12 outputs electrically isolated in pairs. Outputs 1 - 8 provide 9 V DC each with a maximum current draw of 250 mA per pair. Outputs 7 and 8 additionally feature a polarity switch to change the center pin from negative to positive (and the barrel to negative). Outputs 9/10 provide 18 V DC each with a maximum current draw of 125 mA. Additionally, the upper output is switchable to 12 V DC. Provid...
    $389.95 | SAVE 39%
    SPECIAL ORDERED FROM MANUFACTURER, WAIT TIMES VARY. PLEASE CONTACT US FOR AVAILABILITY
You have selected
  • Filter: Sound and Keys Accessories
  • Brand: PALMER GERMANY (clear)

CLEAR ALL

Narrow Your Results