Guitar, Bass and Folk Instrument Parts and Hardware

  • 91 Products
  • Sort by:
  • Products Per Page:
  • Dunlop - 6S/6190 - Accu-Fret Set
    Item # GU191
    | Mfg # 6S6190
    | UPC # 710137003453
    Accu-Fret Fretwire is normally manufactured from a nickel/silver alloy, sometimes called German Silver. The most common combination is a 18% nickel content and the three-quarter hard or harder condition for durability. Jumbo fretwire allows for maximum sustain and fret life. 2-5/8", 24 pieces.  
    $18.30 | SAVE 35%
    0 IN STOCK, EXPECTING MORE SOON
  • For EMG pickups only, the BTS System features a pre-wired balance control (blend) and master volume with the bass and treble on separate pots.Package Includes: 4 control knobs
    $89.00 | SAVE 19%
    0 IN STOCK, EXPECTING MORE SOON
  • The EXB is an unconventional equalization control for bass that increases the low and high frequency regions while reducing the midrange simultaneously to provide the gain and punch that bass players want. Slap players will especially appreciate its superior clarity and percussive quality. Similar in design and construction to the EXG, this unit is compact and will fit into most EMG equipped instrument control compartments without any modificatio...
    $47.00 | SAVE 21%
    0 IN STOCK, EXPECTING MORE SOON
  • For flexibility in tone at your fingertips there is no better choice than the EXG Guitar Expander. The frequency response of the EXG is similar to normal guitar amp equalization. The lows and highs are boosted while the midrange is dipped out. The EXG is great for creating a fuller tone that doesn't get muddy, while keeping it clean and clear, letting your guitar stand out in the mix.Package Includes: Output jack and battery clip set
    $47.00 | SAVE 21%
    0 IN STOCK, EXPECTING MORE SOON
  • The RPC is a variable active control that boosts the high frequency response up to 6 dB at 4000 Hz, while simultaneously reducing low frequency response. Its potentiometer controlled circuitry allows you to sweep from natural sound to accentuated highs typical of single-coil pickups. Like the SPC, it can be wired to one pickup or at the output of the guitar.Package Includes: Output jack and battery clip set
    $47.00 | SAVE 21%
    0 IN STOCK, EXPECTING MORE SOON
  • The SPC or "Strat Presence Control" is often called the fat control. The original intent of the SPC was to turn the tone of a single-coil pickup into a dual-coil. This is accomplished by boosting the gain in a broad mid-band fashion and reducing the highs. The result is a fatter, louder tone from any single coil pickup, but you can also use it on a humbucking to give you a high output, really fat tone that's great for slide guitar.Package Include...
    $47.00 | SAVE 21%
    0 IN STOCK, EXPECTING MORE SOON
  • EVH Low Friction Pot, 500k
    Item # GA813500K
    | Mfg # 0220835000
    | UPC # 717669864774
    Finally anyone can be a tinkerer! The highly sought after pickups and pots previously only available on the Wolfgang USA are now available to everyone. EVH® Bourns Low Friction Controls are available in 250k and 500k values.
    0 IN STOCK, EXPECTING MORE SOON
  • Fender '52 Telecaster Black, 1-Ply, 5-hole Pickguard
    Item # GU8872019
    | Mfg # 0992019000
    | UPC # 717669447038
    One of the really nice things about Fender® instruments is that you can change the look of your instrument with relative ease. One of the easiest ways to accomplish this is to replace the pickguard! Fits: '52 American Vintage (U.S.), '50s Telecaster (Mexico).
    0 IN STOCK, EXPECTING MORE SOON
  • Fender '57 Stratocaster White, 1-Ply, 8 Hole Pickguard - For 3 single coil pickups
    Item # GU8872017
    | Mfg # 0992017000
    | UPC # 717669447014
    One of the really nice things about Fender® instruments is that you can change the look of your instrument with relative ease. One of the easiest ways to accomplish this is to replace the pickguard! Fits: '57 American Vintage, SRV and Eric Clapton Stratocasters (USA) '50s Stratocaster (Mexico)
    0 IN STOCK, EXPECTING MORE SOON
  • Fender '62 Jazz Bass - 11 Hole Pickguard - Tortoise Shell
    Item # GU8872022
    | Mfg # 0992022000
    | UPC # 717669447069
    One of the really nice things about Fender® instruments is that you can change the look of your instrument with relative ease. One of the easiest ways to accomplish this is to replace the pickguard! Fits: '62 American Vintage, American, and American Standard Jazz Basses (U.S.). Will not fit 5-String Jazz Basses. The '62 Jazz Bass pickguard is mounted with 11 holes with 4 extra holes to accommodate a thumbrest and pickup cover. Has truss rod ...
    0 IN STOCK, EXPECTING MORE SOON
  • Fender '62 Precision Bass - 13 Hole Tortoise Shell, 4-Ply Pickguard
    Item # GU8872021
    | Mfg # 0992021000
    | UPC # 717669447052
    Fits: '62 American Vintage, American and American Standard Precision Bass (U.S.). Standard Precision Bass (Mexico). Will not fit 5-String Precision Basses. There are 4 additional holes in the pickguard to accommodate a thumbrest and a pickup cover. One of the really nice things about Fender® instruments is that you can change the look of your instrument with relative ease. One of the easiest ways to accomplish this is to replace the pickguard...
    $73.90 | SAVE 7%
    0 IN STOCK, EXPECTING MORE SOON
  • Fender '62 Precision Bass - 3-Ply, 13-hole Pickguard
    Item # GU327
    | Mfg # 0991361000
    | UPC # 717669447007
    Fits: '62 American Vintage, American and American Standard Precision Bass (U.S.). Standard Precision Bass (Mexico). Will not fit 5-String Precision Basses. There are 4 additional holes in the pickguard to accommodate a thumbrest and a pickup cover. One of the really nice things about Fender® instruments is that you can change the look of your instrument with relative ease. One of the easiest ways to accomplish this is to replace the pickguard...
    0 IN STOCK, EXPECTING MORE SOON
You have selected
  • Filter: Guitar, Bass and Folk Instrument Parts and Hardware

Narrow Your Results