FURMAN

A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8x2 in to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. The M-8x2 is designed for applications where lights are not required. Features: Noise Filtration: AC noise filtering to reduce radio frequency and electromagnetic interference (R...

Standard level filtration from radio frequencies and electromagnetic interference Standard level of surge suppression Dual pull-out rack lights with dimmer control 8 rear panel outlets and one front panel outlet Sturdy one rack space design 15 amp rating, with circuit breaker One year limited warranty

Furman SS6B This 6-outlet power strip is ideal for many applications including live sound, studio, and DJ setups. You won't need to worry where your power outlets are with the 15 ft. cord. A rugged metal housing can withstand years of abuse. A built-in surge protector protects all of your valuable equipment. Furman SS6B Features: 6-outlet strip or block Heavy-duty metal construction 15 ft. power cord Lit ON/OFF switch Circuit breaker ...

This adapter cord allows you to use your 20 amp products in 15 amp applications. Approximately 12" long, 20 amp socket to 15 amp plug.

Furman HR-2 The compact HR-2A Headphone Remote Station is a passive headphone box that provides two headphone jacks, each with its own volume control. The HR-2 clamps to any microphone stand using included hardware. Any number of HR-2's may be connected to a Furman HA-6A or SP-20A Headphone Amplifier by daisy-chaining with standard XLR/XLR microphone cables, or, with the use of an adaptor, to any power amp.

Furman RS-1 The RS-1 Remote System Control Panels provide a simple way to control AC equipment from one or more locations, using only inexpensive low-voltage wiring. The panel can be easily installed in a single gang switchbox with a minimumdepth of 1.5". Features include a locking key switch and a "System On" indicator LED. The RS-1 has a maintained contact "Start ON/OFF Sequence" push-button. The rear of the panel h...