AVIOM

Replacement universal switching power supply for most Pro16 Series products. The PS-120 is a replacement universal switching power supply for most Pro16 Series products. The PS-120 can be used with the following products: AN-16/i Input Module AN-16/o output Module A- 16II Personal Mixer A-16R Personal Mixer A-16D A-Net Distributor A-16T (discontinued) A-16 (discontinued)

The A-16CS is a remote controller for the A-16R Rack-Mount Mixer with the same easy-to-use interface as the A-16II. The A-16CS Control Surface allows the A-16R Personal Mixer to be mounted in a rack with power amps, wireless transmitters, effects, etc., while still allowing a performer to have complete control over mix functions and presets. In addition, the A-16CS provides intuitive control over basic mix functions for systems in non-performanc...

The A-16D distributes a 16-channel Pro16® A-Net® stream to up to eight Pro16 devices. With one A-Net input and eight parallel A-Net outputs, the A-16D provides a low-cost way to replace daisy-chain connections with star configurations. The A-16D is also capable of distributing DC power out any of the eight A-Net Out jacks, eliminating the need to connect a power supply at each Personal Mixer. Any combination of powered and unpowered conn...

The A-16D Pro distributes Pro16® A-Net®, plus DC power, to up to 8 devices. Each A-16D Pro accepts one Pro16 A-Net input signal and provides nine parallel outputs, using rugged EtherCon connectors and standard Cat-5e cables. The A-16D Pro provides isolated (floating ground) DC power through the eight A-Net Outs; the ninth output is an unpowered A-Net Thru connector, designed for distributing a copy of the A-Net signal to a second A-Net D...

The A-16II Personal Mixer allows each performer to create a unique, customized monitor mix on stage or in the studio. The A-16II allows individual performers to create custom monitor mixes tailored to their individual needs. Designed for use in live performance or in the studio, the A-16II Personal Mixer gives each performer control over channel volume, grouping, pan, stereo spread, and master volume and tone. Every Personal Mixer in a system ca...

Equally at home on stage, in an AV cart, or mounted in a machine room, the A-16R is a remote-controllable 16-channel stereo digital mixer. The A-16R is a single-rack- space stereo digital mixer that can be added to any Pro16® network. Its versatile feature set makes it the ideal choice for a variety of applications on stage or in permanent installations. For performers using wireless in-ear systems and powered floor wedges, the A-16R couples...

The AN-16/i provides 16 balanced line-level inputs into a Pro16 system. Audio is converted to digital and transmitted via A-Net, up to 500'/150m over Cat-5e. A dedicated audio thru is available for each input channel, allowing the AN-16/i to be seamlessly inserted into an existing audio signal path. Placed at a front-of-house or monitor console, the AN-16/i can be used as a head-end for a Pro16 Monitor Mixing System. Audio from the console - any...

Convert 16 mic- or line-level analog audio channels into full bandwidth digital audio transmitted via A-Net. The AN-16/i-M is a 3U-high rack-mounted mic- and line-level input device with sixteen high-quality microphone preamps and 24-bit A-to-D converters. Each channel contains a three-segment level meter, a continuously variable gain knob, a phase reverse switch, 48-volt phantom power, and a rumble filter with an 85Hz rolloff. In addition, each...

The AN-16/o v.4 provides 16 channels of mic- or line-level outputs from a Pro16® system. The AN-16/o v.4 Output Module is a 1U rack-mount 16-channel digital-to-analog converter for Pro16® digital snake and audio distribution systems. Digital audio transmitted to the AN-16/o v.4 via Aviom's A-Net® Pro16 digital audio transmission protocol is converted to analog using 24-bit, 48kHz converters. Sixteen balanced outputs are provided on t...

The MT-1 is used to mount an A-16II Personal Mixer or A-16CS Control Surface on a standard mic stand. The MT-1 attaches with three screws to the bottom of an A-16II or A-16CS and mounts on any standard mic stand. With an optional right-angle extension bracket (EB-1), you can mount the mixer or control surface on an existing mic or music stand. Attaches to any standard mic stand Threaded thumb screws included