ART

The ART HeadAmp6PRO is a six-channel stereo headphone amplifier that includes a six-channel auxiliary input section that can be used to provide the popular "More-Me" function on each headphone mix. Each output channel also features a dual function BALANCE control which will pan between LEFT & RIGHT sides of the main signal bus, or vary the MIX between the main signal bus and the AUXILIARY input for that respective channel. Bass and treble con...

Problem: How do you connect a CD player, a synthesizer and the line output from a bass amp to a tape deck? Solution: Use a simple stereo mixer. The PowerMIX III can accept either mono or stereo signals and mixes them down to stereo or identical L/R mono signals. Additionally, the PowerMIX III provides a headphone output with its own level control. Usage: 1. Plug the AC adapter into the 12V DC input on the PowerMIX III and plug the oth...

The Tube MP Studio V3? single channel mic pre features ART's new V3? (Variable Valve Voicing) Technology. V3? provides optimized reference points to begin the recording process. The V3? presets were created and fine-tuned by some of the industry's top studio and live-sound engineers, along with our veteran engineering department. V3? allows you to select between a multitude of preamp settings designed for guitars (electric and acoustic), keybo...

Phonograph records have three basic problems: 1. It is physically impossible to press them with ridges that end up allowing low frequencies to come out at the same reproduction level as mid and high frequencies. Bass compensation is therefore needed during playback. 2. Records produce a certain amount of hiss which is covered up in post-production by boosting the gain of the high frequencies before pressing. Counter-EQing during playback compe...

The Phantom I is an excellent phantom power source for any high quality condenser microphone. Designed to deliver clean power without coloring the signal path, the Phantom I is remarkably clean and quiet. Ideal for use with any microphone requiring 9 to 48 volts, the Phantom I comes with it's own power supply and is suggested for use in any application where clean, regulated phantom power is required for optimum microphone response. Features: ...

The ultra low noise Project Series TubeMP microphone preamp can easily handle a wide range of input sources with a minimum of coloration. Small and compact for transport, the Project Series TubeMP is a fully featured professional quality tube microphone preamp. The stackable extruded aluminum case has been designed to ensure easy integration into any desktop studio environment. The ultra clean low noise 48 Volt phantom power supply is current ...

Home recording studios have become a fact of life with more and more finished products going straight from the spare room to the distributor. As a result there is a need for flexible, professional headphone monitoring sufficient for a number of performers, all at a reasonable cost. Basic headphone amps offer one set of stereo inputs and volume-controlled headphone outputs, however more options are needed in the studio. For example, it may be nece...

The Xdirect is a high quality interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input. The high impedance single-ended 1/4" and XLR inputs are buffered and converted, by very low noise active electronics, into an isolated balanced low impedance signal source. The Xdirect has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated bala...

The new dPDB? Passive Direct Box features two high-quality direct boxes in one portable enclosure. It is a rock solid, roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs. It also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer. The dPDB? features switchable Input Attenuat...

The DTI is a high quality passive audio interface that uses a pair of high performance transformers to totally separate input and output signals, thereby isolating two systems and reducing the potential for hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response ensuring a very clean, neutral sound with virtually any audio source. The transformers are wound for 1:1 unity gain and are designed to ...

The PDB allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer. It automatically balances and matches the line level outputs of guitars, basses, modern synths and electronic keyboards. The PDB? Passive Direct Box is a rock solid, roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced input...

Sometimes floor monitors are a problem. There isn?t enough room for them onstage or someone sits in and can?t hear the monitors or the drummer can?t hear them well enough. Or perhaps it?s a pick-up gig or a rehearsal and you didn?t have enough time to set them up. In any case, sometimes it would be preferable just to put on headphones and somehow connect them to the PA. That?s where a headphone tap comes in. This is a passive device with an input...