Seymour Duncan Vapor Trail Analog Delay - Guitar Effect Pedal
Item # EFF11900002
| Mfg # 11900002
| UPC # 800315039685
Our Price: $179.00
Retail: $256.00 |
You Save: 30%
Please see price in cart.
ONLY 2 IN STOCK
Vapor trail is a true analog delay pedal designed using the famed Bucket Brigade circuitry to provide authentic vintage tone with clarity, warmth and presence. Responsive modulation controls add shimmer and movement to your tone – with the Rate and Depth controls located on the top panel for easy access in live settings. From slap-back echo, ambient and long liquid delays to rotating speaker and long and liquid delays, Vapor Trail delivers a multitude of brilliant sounds. Vapor Trail also features a TRS insert that can send wet signal to any other pedal or effect, such as a flanger or chorus. You can also use it to separate the wet and dry outputs for stereo or recording setups, or plug in any standard volume pedal, and adjust the amount of wet signal with your foot. To round out the special features on this unit, we’ve made the Delay knob translucent with a cool blue LED that flashes to give you visual feedback on the delay time you have selected – especially handy when you’re playing live on a dimly lit stage! Like all of our pedals, Vapor Trail is designed and assembled at our Santa Barbara, California factory by the same team responsible for our legendary pickups.
Type of Circuitry: Analog Bucket Brigade Devices (BBDs) supported by modern low-noise
analog electronics. No microprocessors or digital signal processors.
Bypass: True bypass
Delay Range: 15ms to 600ms. Actual delay time indicated by flash rate of illuminated delay time knob.
Dry Gain: 1dB fixed
Wet Gain: Adjustable from muted to +3dB. At the highest blend settings, the first echo is
actually louder than the dry signal.
Repeat Control Range: One repeat to runaway repeats
Modulation Rate Range: 0.2Hz to 4 Hz
Modulation Depth Range: Zero to “over the top”
Auxiliary Functions: Wet channel insert loop, allows external effects to be applied to only the
wet signal. Also serves as a wet-only output for wet/dry stereo or studio use.
Dry Frequency Response: <-1dB @ 10 Hz and 100 kHz
Dry Distortion: 0.002% at 250 Hz, 1V RMS output
Dry Noise Floor: -100dBv at output, 400Hz to 20kHz with input unplugged
Wet Noise Floor: -90dBV at output, 400Hz to 20kHz
Input Impedance: 1 Meg (active); open (bypassed)
Output Impedance: 1K ohm
Power: Internal 9V battery or external 9V-18V regulated power supply.
Current Consumption: 11mA typical
Dimensions:Chassis size 2.61” x 4.90” x 1.45” (W x L x H)
Weight: 0.8lb. without battery
No one has rated this yet. Why don't you be the first?
WRITE A REVIEW
Product Warranty Information
All instruments in our catalogs and on our shopping site carry the manufacturers' warranties against defects in parts and workmanship. Should a defect occur within the manufacturer's warranty period, contact us
We will be glad to help facilitate the repair or replacement as specified by the manufacturer. The manufacturer will determine whether the defect is covered under their warranty; we do not make that determination.
Please note: U.S.-based manufacturers WILL NOT honor warranties for items sold and shipped outside the U.S. Also, if a school, school district, or board of education purchases an instrument and resells it to an individual, the manufacturer considers the warranty to be void. Warranties are extended only to the original purchaser!
All warranties, stated or implied are held with the product manufacturer and they vary from item to item. Consult the documentation that came with your product for details in addition to the information below.